Safety Precautions
Always read instructions before use. Reduce fire or shock risk: do not leave unattended or use near children. Ensure proper grounding and avoid modifying plugs.
1.1 General Safety Warnings
Always read and follow all instructions carefully before using the BISSELL Little Green. To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended or allow children to operate it. Ensure the machine is properly grounded and avoid using modified or damaged plugs. Keep the cleaner away from flammable materials and avoid overheating. Use only BISSELL-approved cleaning solutions to prevent internal damage. Be cautious when cleaning stairs and ensure the machine is stable. Never modify the 3-prong grounded plug, and avoid using the machine near water sources. Follow all safety guidelines to ensure safe and effective cleaning.
1.2 Grounding Instructions
Proper grounding is essential to prevent electric shock. Always plug the BISSELL Little Green into a properly grounded outlet. Do not modify the 3-prong grounded plug, as this could lead to safety hazards. Ensure the outlet meets the machine’s power requirements. If the plug is damaged, do not use the machine until it is replaced. Keep the power cord away from water and avoid using the machine in wet conditions. Regularly inspect the cord for damage or wear. Grounding instructions are critical for safe operation, so never bypass or ignore them. Follow these guidelines to ensure the machine operates safely and effectively.
Machine Preparation
Assemble and set up your BISSELL Little Green. Fill the clean water tank with BISSELL solution, then add warm water to the recommended fill line.
2.1 Assembly and Initial Setup
Start by unpacking and inventorying all components. Attach the hose to the machine and ensure the cleaning tool is securely connected. For initial setup, place the BISSELL Little Green on a flat surface. Insert the clean water tank into the machine, ensuring it clicks into place. Before first use, rinse the tank thoroughly. Plug in the machine, ensuring the cord is properly wrapped when not in use. Always test the spray function on a small, inconspicuous area to ensure proper operation; Follow these steps carefully to prepare your machine for effective cleaning. Proper assembly ensures optimal performance and safety.
2.2 Filling the Clean Water Tank
To fill the clean water tank, first remove it from the machine. Use warm tap water (maximum 140°F or 60°C) for optimal cleaning results. Fill the tank to the “FORMULA” line with BISSELL cleaning solution, then add water up to the “FILL” line. Ensure not to exceed the recommended levels to avoid overflow. Avoid using non-BISSELL solutions, as they may damage the machine. Once filled, securely reattach the tank to the machine, ensuring it clicks into place. Double-check that the tank is properly aligned and seated to prevent leaks during use. Always refer to the formula and water ratio guidelines provided in the manual for best performance. This step is crucial for effective cleaning and maintaining your machine’s longevity.
2.3 Adding BISSELL Cleaning Solution
For optimal results, use only BISSELL cleaning solutions designed for the Little Green. To add the solution, first remove the clean water tank and locate the formula line. Pour the BISSELL cleaning solution into the tank up to the “FORMULA” line. Next, fill the tank with warm water (max 140°F or 60°C) to the “FILL” line. Ensure the solution and water mixture does not exceed the recommended levels to prevent overflow. Securely replace the tank cap and reattach the tank to the machine, ensuring it is properly aligned. Using non-BISSELL solutions may damage the machine, so always adhere to the guidelines provided. This step ensures effective cleaning and maintains the machine’s performance and longevity. Always follow the recommended ratio for best results.
Using the BISSELL Little Green
Hold the tool 1 inch above the surface, press the spray trigger to dispense the solution, and thoroughly treat stains or spots for effective cleaning.
3.1 Spraying the Cleaning Solution
To spray the cleaning solution, hold the tool approximately 1 inch above the surface. Press the spray trigger to dispense the water and solution mixture evenly. For best results, treat stains or spots thoroughly, ensuring the area is well-saturated. Use the BISSELL Pretreat Formula on heavy traffic areas or stains, allowing it to penetrate for at least 3 minutes before cleaning. Avoid over-saturating the surface, as this may damage certain materials. Always test a small, inconspicuous area first to ensure color safety. Use only BISSELL-approved cleaning products to prevent internal component damage. Follow the instructions for filling the clean water tank and adding the solution correctly.
3.2 Applying Pretreatment Formula
Before cleaning, apply the BISSELL Pretreatment Formula to heavy traffic areas, soiled spots, or stains. Spray the formula evenly, ensuring complete coverage. Allow it to penetrate for at least 3 minutes to loosen dirt and stains effectively. For tougher stains, you can extend the penetration time up to 5 minutes. Gently blot the area with a clean cloth to remove excess moisture before proceeding with the cleaning process. Avoid rubbing, as this may damage the surface. Always test a small, inconspicuous area first to ensure the formula does not cause discoloration. Use only the recommended BISSELL Pretreatment Formula to maintain the machine’s performance and avoid any potential damage.
3.3 Cleaning Stains and Spots
To effectively clean stains and spots, hold the cleaning tool 1-2 inches above the surface. Press the spray trigger to release the water and solution mixture, thoroughly saturating the area. Allow the solution to work for a few seconds, then gently blot the stain with a clean cloth or sponge. Avoid rubbing, as this may damage the material. For stubborn stains, repeat the process until the stain lightens or disappears. Clean one section at a time, working from the outside in to prevent spreading the stain. Regularly rinse the cloth and blot dry to remove excess moisture and prevent over-saturation.
3.4 Using the Tough Stain Tool
The Tough Stain Tool is ideal for tackling stubborn stains and heavily soiled areas. Hold the tool 1 inch above the surface and press the spray trigger to release the cleaning solution. Gently work the tool back and forth over the stain, ensuring thorough coverage. For particularly tough stains, repeat the process, allowing the solution to penetrate for a few seconds before blotting with a clean, damp cloth. Avoid applying too much pressure, which could damage delicate surfaces. Use the tool in small, controlled sections to prevent spreading the stain. This method is effective for upholstery, stairs, and tight spaces, ensuring deep cleaning with precision.
Maintenance and Care
Empty the dirty water tank after each use and rinse it thoroughly. Dry the machine, especially the tools, to prevent mold and mildew buildup. Store properly.
4.1 Emptying and Cleaning the Dirty Water Tank
To maintain your BISSELL Little Green, regularly empty the dirty water tank after each use. Locate the tank, typically at the base of the machine, and carry it to a sink. Open the tank’s lid or release the latch to pour out the contents. Rinse the tank with warm water to remove any residue. For tougher stains, mix mild detergent with water and let it soak before rinsing thoroughly. Ensure the tank is completely dry before reattaching it to the machine to prevent mold and odors. Cleaning the tank helps maintain the machine’s efficiency and hygiene for future use.
4.2 Drying the Machine After Use
After each use, thoroughly dry the BISSELL Little Green to prevent moisture buildup and mold. Start by emptying the dirty water tank completely. Detach any removable parts, such as the cleaning tool or upholstery brush, and rinse them under warm water. Use a clean, dry cloth to wipe down the exterior and interior of the machine, paying attention to areas where water may collect. Allow all components to air-dry fully before storing. Regular drying helps maintain the machine’s performance and prevents unpleasant odors. Ensure no moisture remains in the tanks or hoses before placing the machine in its storage location.
4.3 Storing the Machine Properly
Store the BISSELL Little Green in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the machine is completely dry after use to prevent mold or mildew. Place it upright to avoid accidental leakage from the tanks. For extended storage, consider using the original packaging or a protective cover to shield it from dust. Keep the machine out of reach of children and pets. Before storing, check for any blockages in the hoses or spray tips and clear them if necessary. Store all accessories separately to maintain organization. Proper storage will help maintain the machine’s performance and longevity, ensuring it remains ready for future use.
Troubleshooting Common Issues
Check for blockages in hoses or spray tips. Ensure tanks are properly filled and not empty. Verify power cord connection and outlet functionality. Refer to manual for specific solutions.
5.1 Weak or No Spray Function
If the spray function is weak or not working, check for blockages in the spray tip or hose. Ensure the clean water tank is properly filled and the solution is correctly mixed. Verify that the trigger is functioning smoothly. If issues persist, clean or replace the spray tip. Always use BISSELL-approved cleaning solutions to avoid internal damage. Regular maintenance and cleaning of the machine can prevent such problems. For further assistance, refer to the troubleshooting section in the manual or contact BISSELL customer support.
5.2 Machine Not Turning On
If the machine fails to turn on, first ensure it is properly plugged into a grounded outlet. Check the power cord for visible damage and verify that the outlet is functioning. If using an extension cord, ensure it is rated for the machine’s power requirements. Next, check the circuit breaker or fuse box to rule out electrical issues. Make sure all parts are correctly assembled and the tanks are securely locked in place. If the issue persists, consult the user manual or contact BISSELL customer care for further assistance. Always follow safety guidelines when troubleshooting electrical appliances.
Accessories and Additional Resources
Included accessories enhance cleaning efficiency. For additional help, refer to the user manual or contact BISSELL customer care for support and troubleshooting.
6.1 Included Accessories
Your BISSELL Little Green comes with essential accessories to enhance cleaning efficiency. The Tough Stain Tool is perfect for deep-seated stains and hard-to-reach areas. A Pretreat Spray is included for targeting heavy traffic zones and stubborn spots. The clean water tank is designed for easy filling and cleaning. Additionally, a power cord and cleaning tool with a spray trigger are provided for convenient operation. These accessories ensure versatile cleaning capabilities for various surfaces and stains. Always use BISSELL-recommended products to maintain optimal performance. For more details on accessories, refer to the user manual or visit the BISSELL website for additional resources and support.
6.2 Where to Find Additional Help
For further assistance, refer to the user manual provided with your BISSELL Little Green. The official BISSELL website offers detailed guides, troubleshooting tips, and FAQs. You can also contact BISSELL Consumer Care for personalized support. Additionally, online tutorials and videos demonstrate various cleaning techniques. Retailers like Amazon or Walmart may provide customer service for purchase-related inquiries. Ensure to visit authorized sources to avoid misleading information. BISSELL’s official customer service hotline is available for direct assistance with any machine-related concerns. Online forums and communities may also offer user-generated tips and solutions. Always rely on BISSELL-approved resources for accurate and safe usage guidance. This ensures optimal performance and longevity of your cleaning machine.